Plague Doctor Dice Tower

Etsy

$46.95 
SKU: ET-10207875093

This tower is printed at full size and is suitable for standard 20mm dice. Simply drop your dice in the top and enjoy the sound as your die emerges from the bottom...

We only use premium PLA's and print in a high quality setting with a .2mm Layer Height. We do our best to try to provide pictures of our pieces once they have actually been printed. There is nothing worse than looking at a stock computer renderings of the model you have your heart set on just to find out after ordering that the print quality of the seller is not even close to the rendered artwork :( If this listing does not have a printed picture be sure to check some of our other Building and Terrain Listings as many do have images of our actual printed pieces.

Most Fates End towers are printed as 2 or 3 separate pieces - tray, body, and roof - with detailing found on the inside as well as the outside of the tower. Finally, they average about 9-11 in height. The default size (100%) is designed for dice in the 16mm to 20mm family, with the D20 die being 20mm.

For those who are new to gaming or PLA based prints please keep in mind a few limitations... PLA has a low melting point so it should not be left in an area that would have high temperatures, such as a hot car, as that may cause the plastic to soften and possibly deform. Additionally, do not put PLA products in the dishwasher. If you need to clean a piece, wash by hand in warm water with a mild dish soap.

Please Note: This tower is designed and licensed through "Fates End" and we at The Riverside Woodshop print and finish all models in house to meet the needs of our customers! Licensed under our Fates End Merchant Agreement. License #DL052. We print these to order so our normal production time is 7-8 days depending on our work list.